AQAREST WR 1300 is reactive Fluid emulsion especially designed for treating substrates to impart and improve water repellent properties.Examples are Textiles and Fibers, Paper, Wood and wood articles, Gypsum Board, Plywood, and Particle Board, Powder, Fire fighting foam & Insulating materials.


Active Polymer Appearance Sp Gravity 25°C Viscosity @25°C Solvents
45% to 50% Milky white liquid 0.99 – 1.01 10 - 35 (cPs) Water


Typical Values – Should not be considered as specifications.

FEATURES

• Provides Good water repellency.
• Reactive silicone in emulsion form.
• Dilution stable.
• Formulation flexibility by use of catalyst.
• Produces flexible water repellent film.

HOW TO USE

WR 1300 is usually applied from dilute solution. Solutions are prepared by diluting distilled pure water and stirring the mixture gently until it uniforms. The extent of dilution will depends on the surface to be treated and surface properties desired.Care should be taken that the dilution remains acidic as alkaline PH will lead to evolution of hydrogen.

CURING

Coatings of WR 1300 Emulsion are usually heat cured to develop water repellency. Curing temperatures range from 120°C to 175°C. With catalyst added at a typical ratio of 20:1 (emulsion to catalyst). Curing times are generally 4 to 5 minutes at 150°C or 30 to 40 Seconds at 180°C.

SHELF LIFE

Six months in original container.

STORAGE & HANDLING PRECAUTIONS

It is recommended that normal safety precautions (hand gloves & safety goggles) be taken while handling the product. The material should be stored in original containers in a cool place and protected from direct exposure to sunlight.Product safety information required for safe use is not included. Before handling, read Material Safety Data Sheets (MSDS) and container labels for safe use, physical and health hazard information.