OMS 280D is Silicone that is primarily used to Maintain uniform pigment dispersion. Prevents separation problems like pigment floating, flooding, Silking and provides Mar resistance. Reduces surface friction of coating by imparting a high degree of slip. The scratch resistance of the coating improves significantly. Coats the individual pigment particles to prevent them from coalescing. The additive prevents one pigment of a multi-pigment system from agglomerating in masses or floating to the surface of the paint film.

Parameters Value
Appearance Colorless,Clear
Viscosity 1 cst.
Flash Point (by open cup) 6  C
Sp. Gravity at 25°C 0.875 gm/cc
Suitable Diluents Aromatics such as Xylene, toluene, mineral spirits, Ketones

Typical Values – Should not be considered as specifications.

OMS 280 is supplied in a flammable solvent. Following precautions should be observed while working with this material.

NOTE: Changes may occur from system to system as methods of use and conditions of applications are beyond our control, hence users are requested to evaluate the product before actual application. This product is neither tested nor represented as suitable for medical or pharmaceutical uses


SS OMS 280D should be used 0.05 % to 0.5 % weight percent based on the total formulation


It can be incorporated at any stage of the production process or added during final let-down.


  • Lowers surface tension
  • Mar Resistance
  • Improve Slip
  • Improved Dispersion


Store the original container in a cool and dry place. Shelf life in the original unopened containers, when stored at or below 25C, is 2 years


Product safety information required for safe use is not included. Before handling, read Material Safety Data Sheets (MSDS) and container labels for safe use, physical and health hazard information